Please Note: Because this item is bulky and heavy, the Free delivery option does not cover all areas. If you would like delivery to Scottish Highlands, Scottish Isles, Isle of Man, Isle of Wight, Channel Islands or Northern Ireland, please contact us before ordering on 01530 516926
Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small professional workshops.
A simple belt change selects the correct spindle speed for the tooling. The 4 speed version provides the versatility for cutting Softwoods and Hardwoods as well as Sanding and Routing operations.
The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. The two aluminium fences are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. The sliding carriage consists of a cast iron table with four bearing guides running along an aluminium extrusion.SPECIAL OFFER : Order now and receive a FREE Routing adaptor to allow 1/2" shank router bits to be used. Worth £49 !!
Runs off any standard 13amp, 240v electric supply.
Motor (induction) 1500w, 240v
Main table size 600mm x 400mm
Spindle diameter 30mm
Speeds 4 (1500, 4500, 6500 & 8500rpm)
Vertical stroke 110mm
Table aperture diameter 160mm
Table aperture depth 50mm
Dust extraction outlet 100mm
Dimensions (WxDxH) 830mm x 1070mm x 1280mm
Rating Light trade
Warranty 1 Year