Charnwood W030 Spindle Moulder with Sliding Carriage



Charnwood W030 Spindle Moulder with Sliding Carriage Charnwood W030 Spindle Moulder with Sliding Carriage Charnwood W030 Spindle Moulder with Sliding Carriage Charnwood W030 Spindle Moulder with Sliding Carriage Charnwood W030 Spindle Moulder with Sliding Carriage Charnwood W030 Spindle Moulder with Sliding Carriage Charnwood W030 Spindle Moulder with Sliding Carriage

Product Features

  • Cast Iron Main Table
  • Cast Iron Tenonning Table
  • Cast Iron Cutter Hood
  • 4 Speeds For; Softwood, Hardwood, Routing, Sanding
  • Maximum Tooling Diameter 160mm

Buy from Amazon.co.uk


Please Note: Because this item is bulky and heavy, the Free delivery option does not cover all areas. If you would like delivery to Scottish Highlands, Scottish Isles, Isle of Man, Isle of Wight, Channel Islands or Northern Ireland, please contact us before ordering on 01530 516926

LIMITED TIME OFFER - FREE 1/2'' Routing Collet

Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small professional workshops.

A simple belt change selects the correct spindle speed for the tooling. 4 speed options (from 1500rpm up to 8500rpm) provide even more versatility;

The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. The two aluminium fences are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling.SPECIAL OFFER : Order now and receive a FREE Routing adaptor to allow 1/2" shank router bits to be used. Worth £49 !!

Runs off any standard 13amp, 240v electric supply.

Specification

Motor (induction) 1500w, 240v

Main table size 600mm x 400mm

Sliding table size 400mm x 180mm

Spindle diameter 30mm

Speeds 4 (1500, 4500, 6500 & 8500rpm)

Vertical stroke 110mm

Table aperture diameter 160mm

Table aperture depth 50mm

Dust extraction outlet 100mm

Dimensions (WxDxH) 830mm x 1070mm x 1280mm

Weight 95kg

Rating Light trade

Warranty 1 Year


More Products by“Charnwood”



Related Products